Tap water charging software Share how to read the water meter correctly? How to read the water meter?
The water meter is an instrument for measuring water flow, which everyone will encounter in daily life, but we don't know what it means when we look at the large and small water meters. The following small series will introduce how to see the diagram of the water meter reading and how to see the water meter reading correctly.
The first is the common combination of word wheel and pointer to display readings.
Read the black word wheel reading:
10000 digits: 0
Thousands: 0
Hundreds: 0
Ten digits: 0
Ones: 1 (close to 1 here, fixed and counted as 1)
Reading the red pointer: the reading of the red pointer is used for factory inspection, and we don't need to care about it. Result: 1 ton
Second, read in the pure pointer display mode
Black pointer reading:
Thousands（ × 1000)：2
Hundred（ × 100)：2
Ten（ × 10)：6
Ones（ × 1)：1
Reading the red pointer: the reading of the red pointer is used for factory inspection, and we don't need to care about it. Result: 2261 tons
Third
The bit or bits after z in the word wheel are red. Like the red pointer, we can ignore these bits. Read the black word wheel reading: 100000 bits: 00000 bits: 0 thousand bits: 0 hundred bits: 0 ten bits: 1 bit: 1 red word wheel reading: 6 (we ignore it) Read the red pointer part: the red pointer reading, which is used for factory inspection, and we don't need to care. The result is 11 tons.
Say more about intelligent water meter
In recent years, users of newly built buildings and replaced water meters basically use IC card smart water meters. Its disk is basically the same as that of digital water meters, which will not be repeated here. The IC card smart water meter can be used after recharging, so that users can use water more economically and conveniently. If the amount in the card is used up, the water supply will also be stopped at the same time.
Precautions for intelligent water meter
When water is not used, if the pointer of the water meter, such as the red pointer, is still rotating, it indicates that the water equipment has leakage and should be repaired in time. When installing the water meter, it must be level and straight in the horizontal direction, and should avoid fire, scalding, flooding and violent vibration, so as to extend the service life of the water meter and ensure the accuracy of measurement.
Remind the user to pay attention to timely recharge when using the intelligent water meter to ensure the normal operation of the water meter.
What about "surplus" water?
When the water volume is less than 3 tons, it will remind users to recharge by closing the valve with an early warning. At this time, just press the button above to continue using water, or call the 24-hour water supply hotline for professionals to operate. Another is the water supply failure caused by external reasons such as the emergency repair of water supply pipelines. Citizens can check whether the water supply system in the community is normal through the property or the water supply hotline.
